I. Material: Q195,Q215,Q235,35K,30Cr, 40Cr, 45# etc. Low carbon and middle carbon steel coil

II. Processing wire diameters: 2.0‐5.0mm steel coils

III. Working flow:Steel brusher descaling →Sand belt rust‐removing → Wire drawing

IV.Equipments Compose:

V. Technical Parameter of SC‐03 Steel Brusher Descaler

5.1 Processing material and diameter :   Middle/ Low carbon steel wire of 2.0‐5.0mm
5.2 Steel brusher rotation speed: 1400RPM, wire speed is reach to 100m/min  
5.3 Current meter allow max. value ≤6.8A  
5.4 Motor power: 4 pcs* 1.1 KW, Total 4.4KW  
5.5 Noise ≤ 65DB  
5.6 Processing capacity: About 4‐6 Tons per 8 working hours based on 2.0‐5.0mm steel wire  
5.7 Steel brusher service life:1000 ‐1500 Tons
5.8 Finishing wire rust resistance time in normal storage workshop after pre‐treatment by this machine ≥6 months
5.9 Input weight : about 500 kgs
5.10 Dimension(L*W*H): 1700*500* 1000mm

VI    SD‐08 Sand belt Dust‐Removing Machine

6.1 Processing material and diameter :   Middle/ Low carbon steel wire of 2.0‐5.0mm  
6.2 Dimension(L*W*H  ): 2200 *800 *1200mm   Center Height :800mm  
6.3 Steel moving speed : about 66‐88m/min  
6.4 Motor power : 3+2.2+2.2KW= 7.4KW  
6.5 Noise ≤ 65DB  
6.6 Input weight about 500kgs  
6.7 Processing capacity: About 4‐6 Tons per 8 working hours based on 2.0‐5.0mm steel wire

6.8  Sand belt service lift of each uni(4pcs): 8‐15 Tons,each sand belt refer price is: 5.5CNY (= 0.85USD), sand belt is prepared by user,specification :   L:1090mm * W:120mm,    mesh:    80 mesh for 2.0mm wire,120 mesh for 3.0mm wire,180 mesh for above 3.0 mm wire

6.9 Finishing wire rust resistance time in normal storage workshop after pre‐treatment by this machine ≥6 months